Private Pool
Garden
Terrace
Bounding Wall
Water Tank
Technical Features:
Reinforced Concrete:
a) B/reinforced concrete frame structure of the building, in the envisaged project It will be constructed in the specified dimensions and details. Positioning of the foundation is done according to the
project. All reinforced concrete components should be watered twice a day for 3 days after pouring. For all B/Arms castings, the auditor must be notified one business day in advance. C30 READY CONCRETE
is used in all castings.
Walls/Ceilings:
Walls: External brick walls as shown in the project 25 It was built using bricks and cement mortar. The interior walls are made of 10 cm thick bricks.
Plastering work: Three-hand cement-based plaster is applied to all interior and exterior walls.
Insulation: All wet surfaces. Roof insulation and polyurea waterproofing will be provided in large volumes.
In addition, if desired, two-layer, two-way polyurea or cement-based insulation can be applied to balconies. Separate insulation has been made inside the pool.
Electrical works:
The installation of the entire infrastructure is completed with electrical installation and cabling.
There will be a main switch in each flat and all grounding will be done properly. All sockets are manufactured to British electrical standards. If it is necessary to use electrical outlets in bathrooms or outdoor areas, waterproof electrical outlets will be installed. In addition to this work, intercom system cables are laid in appropriate places.
All the stove and oven outlets and air conditioner outlets in the kitchen have high amperage. TV and internet cables and infrastructure are installed in the bedrooms of each flat. There is one outlet for the stove and oven in the kitchen, and all outlets for air conditioning have high amperage. The beds of each flat are equipped with TV and internet cables, and the infrastructure in the rooms is furnished.
Interior and exterior. jobs;
The end user has the option to choose between 3 different colors for the interior of the flat, the exterior color will not be changed.
floor coverings;
In the corridors, kitchens and corridors of the building,
staircases
with dimensions of at least 60 cm * 120 cm and above, with less than 3% quality ceramics that are resistant to scratches and water absorption. tiles;
If prefabricated stone stairs or marble are used on the stairs from the ground floor to the roof, the floor coverings must be compatible.
2 toilet ceramics on all floors, 1 piece on the wall and floor 30 cm * 60 cm or A 1st ceramic 60*60 cm size will be given. In toilets and kitchens; Sanitary ware, toilet, shower and fountain must be made of CE certified stainless steel. (Chrome or matte black coating)
The parquet floor in the bedrooms of the house must consist of 8 mm thick laminate flooring, optionally 12 mm in the corridors. mm thick laminate flooring can be used.
All screeds throughout the building will consist of luxury coating and durable skeleton, and the countertops will be made of Grassstone or LG material.
Joinery
/b> works:
In each apartment, kitchen and wall cabinets are presented in preliminary plans and 3D visuals as presented in the project, and are assembled on site after approval. Benches are not drawn as standard.
The material will be grass paving stone or equivalent. Cabinet doors will be made of glossy melamine. The wardrobes in the bedrooms will be equipped with sliding doors and soft-close accessories.
Interior doors have American pressed panels, wooden water protection boxes, and their accessories will be CE compliant castle locks or equivalent.
Mechanical < b>works:
Includes the infrastructure of toilets, kitchens and wet areas in all flats. Piping infrastructure works Manholes and septic tanks are delivered in working condition with connection to the sewer infrastructure or septic tank. 1 septic tank and wells and their connections will be made in the number and detail shown in the project.
Rainwater drainage pipes on the roof terrace are directed to the ground and laid on the ground in an area away from the building foundation.
There will be a 2-ton water tank on the floor of each flat, 1 minimum Demirdöküm or equivalent brand of 70 liters.
Instantaneous water heater for hot water, 1 1 HP water engine, 1 hydrophore with pressure system.
In all flats, there is 1 24,000 BTU in the living room and 1 12,000 BTU in each bedroom.
Copper pipes, electrical infrastructure and expenses of BTU air conditioners are being completed. Air conditioning units and outdoor motors will be hidden from view in plumbing chimneys or balconies. The flat center will be equipped with a honeycomb.
The infrastructure and piping system will be made in the form of a heat pump. If the buyer wishes, the heat pump and radiator can be activated thanks to the purchase.
The shower and fountain used in kitchens and bathrooms are made of CE-certified stainless steel or chrome-plated brass.
Material accessories are preferred. Shower trays will be made of acrylic or non-slip ceramic material, and shower cabins will be made of glass.
Show original description
Graphs, square meter prices and property index are created in cooperation with 101evler and REIDIN Data Analytics.
29.50% of the people living in Alsancak Kyrenia region work as Private Sector and 15.50% as Freelance. 20.40% of the people living in this region are in the 35-44 age range. In addition, 31.13% of the people living in the region have High School education.
Visit our Region Analysis page for more detailed information.
The demographic information on this page is shown in cooperation with LIPA Consultancy.
4+1 villa with panoramic uninterrupted sea view in Alsancak, Kyrenia
101evler.com has no responsibility about all announcements, information, content and visual pictures entered by the other users or real estate companies. Correctness of these contents which entered by other user/companies are belongs to the announcements owner. All information, documents and photos published on this site are the property of 101evler. It cannot be copied, reproduced, shared without permission.
Send Message